|
Post by Karnie on Oct 23, 2018 18:36:53 GMT 10
I was trying to add a breakable lock to the door, but it seems it is neither controlled by ETS nor AEV file. I mean the kind of lock that can be shot down just like in the village. Wondering what file adds the lock? Or is it controlled in the exe programme? Thanks in advance if anyone can help~
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Oct 24, 2018 11:12:57 GMT 10
In AEV are the only triggers, and events.
If you need to disable the door, remove its trigger.
If you need to block it with a message on the screen.
You need to edit additional scripts.
Write me in PM, I will help you.
I'm a little busy right now.
|
|
|
Post by Karnie on Oct 24, 2018 14:14:49 GMT 10
In AEV are the only triggers, and events.
If you need to disable the door, remove its trigger.
If you need to block it with a message on the screen.
You need to edit additional scripts.
Write me in PM, I will help you.
I'm a little busy right now. Yeah, i know how to handle the doors from one stage room to another in AEV. I am interested in the lock hanging on the door that can be unlocked by shooting it down. But still thanks lol
|
|
|
Post by Karnie on Oct 24, 2018 14:26:51 GMT 10
Hi, i just found your replies disappear one by one. were they just deleted? As for the lock, i guess it won't be so easy since i tried to add same type of the door as the locked one to the village but there is no lock on it. So looks like it is controlled by programme somewhere. I will check it with my tutor and see whether we can find any clue. Thanks very much~
|
|
✫Advanced Coder✫
gridning hard working on a fan game - Resident Evil Remix
Posts: 2,991
|
Post by Mr.Curious on Oct 24, 2018 14:41:54 GMT 10
yes, deleted. Good luck.
|
|
✫Advanced Coder✫
gridning hard working on a fan game - Resident Evil Remix
Posts: 2,991
|
Post by Mr.Curious on Oct 24, 2018 16:45:40 GMT 10
ok I tell you one more time. Usually these locks are located in the UDAS container, but for r20c room it is in the ETM.
ETM r20c - look at et1b00.bin and et3100.bin - one of these has a lock on it, and if you move the model with the ETS the lock will move with it. This being said, the lock is not actually present in the ETM model, so it maybe hardcoded into the exe.
You can try to port this to another room if you know what you are doing and have the right tools. It might not work because , but maybe you will get lucky and the hardcoded part will still load the lock in another room.
Let me know how it goes.
|
|